EOS EMOTEC B6000 Guía de usuario descargar pdf (Pagina 12)

12 GB

If you wish to end your sauna bath

prematurely, press the button.

The symbol on the display then disappears.

Mode

Important notes when programming

Every modification of the preset parameters

must be confirmed by pressing the "MODE"

button.

If you do not press the "MODE" button,

the unit will automatically default back to

the previous parameters.

If you do not touch the unit for a longer

period of time during programming, the

display will default back to standard and

the illumination will cease after a short

time.

If you wish to individually set the heating

time for your sauna system, press the

"MODE" button and choose P2 using the

selection buttons or .

Press the "MODE" button again.

Now you may set the heating time using

the selection buttons.

Confirm your input by holding the "MODE"

button pressed continuously until the new

heating time and the symbol expire on the

display.

Afterwards P2 shortly appears, then the

display returns to default readout. The

maximum heating time now matches the

entered value until changed again (re-start

required).

03:00

P 2

Heating time limiter

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Comentarios a estos manuales

Sin comentarios