EOS EMOTEC B6000 Manual de servicio Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
32
GB
12:00
20:00
20:00
20:00
Unit initialization
After checking all connections once more,
connect the unit to the power supply by swit-
ching on the fuse and the main switch.
On the display appears
and the clock symbol begins to blink.
After a short time (30 seconds) you can start
with programming.
You may now set the current time using
the and buttons during the
blinking of the clock symbol.
To accept the selected time, press the
MODE-button until the selected time
begins to blink.
Briefl y F1 appears on the display.
After that, the current time is displayed and
the unit is ready for operation.
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Comentarios a estos manuales

Sin comentarios